Planet IGS-620TF

Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP Ethernet Switch Physical Port•4-port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function •2-port SFP slot interface, SFP supports 1000Base-X and 100Base-FX transceiver via DIP switch configured Fiber Port Redundancy•Link status auto-detect and redundant on Dual ports with the same connector type •Only Primary-Port is active at a time, the Backup-Port is blocked •When Primary-Port link failure occurs, the traffic will swap to Backup-Port automatically. •Once the Primary-Port status is back to link-up, the traffic will swap from Backup-Port to Primary-Port. Layer 2 Features•Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode •High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth •Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex) •9K Jumbo Frame Size support •Backplane (Switching Fabric): 12Gbps •Integrated address look-up engine, support 1K absolute MAC addresses •Automatic address learning and address aging •CSMA/CD Protocol Industrial Case / Installation•Slim IP30 metal case protection •DIN Rail and Wall Mount Design •Redundant Power Design - 12 to 48V DC, redundant power with polarity reverse protect function- AC 24V power adapter acceptable•Supports EFT protection 6000 VDC for power line •Supports 6000 VDC Ethernet ESD protection•-40 to 75 degrees C operating temperature