Planet Switch BSP-360

Industrial Renewable Power 5-Port Gigabit Managed Switch with 4-Port 802.3at PoE+

Industry-leading Integration of PoE Technology and Renewable Power SystemPLANET’s newly-launched Renewable Energy Industrial 802.3at PoE Managed Ethernet Switch, BSP-360, is designed for deploying a surveillance or wireless network and remotely monitoring and managing the IP-based devices. Based on its green technology, the BSP-360 can be charged by the inexhaustible and natural source of energy, such as solar, wind and hydroelectric power to conserve energy so as to economically power these remote IP cameras and wireless APs, especially used for such expansive applications as dams, forests, deserts, national parks, nature/animal protection areas and highways.

MPPT (Maximum Power Point Tracking) Charge ControllerAn MPPT (Maximum Power Point Tracker) is an electronic DC to DC converter that optimizes the match between the PV solar panels and the battery bank or utility grid. They convert a higher voltage DC output from solar panels (and a few wind generators) to the lower voltage needed to charge the battery effectively

Zero-Carbon and Stable Power SupplyThe nickel-cadmium or lead-acid battery gets recharged by way of the BSP-360 where solar power is sourced. Thus, the BSP-360 will keep powering PD devices without the need of any cabling. Its zero-carbon feature is made possible as the energy the unit gets is renewable. Most importantly, the operation of outdoor wireless IP-based surveillance can be continued into the night as the battery is charged during the day.

Smart Battery ManagementThe BSP-360 features the following special power management functions:Current battery usage status by percentageLow voltage cut-off protection Current Battery Usage StatusThe administrator can remotely access the BSP-360 to know the power status of the battery and renewable energy, and the estimated time of power consumption

Low Voltage Cut-Off ProtectionIf the remaining energy is too low to power the network, the system will automatically power off the device to make sure the system works normally, and an alert is then sent to the administrator at the same time.

Spesifikasjoner:

Physical Port5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE injector function (Port 1 to Port 4)RJ45 type interface for basic management and setupUSB type A female for setting file backup and restoration

Power over EthernetComplies with IEEE 802.3at Power over Ethernet Plus end-span PSEBackward compatible with IEEE 802.3af Power over EthernetUp to 4 ports of IEEE 802.3af/802.3at devices poweredSupports PoE power up to 30 watts for each PoE portAuto detects powered device (PD)Circuit protection prevents power interference between portsRemote power feeding up to 100 metersPoE managementTotal PoE power budget controlPer port PoE function enable/disablePoE port power feeding priorityPer PoE port power limitationPD alive checkPoE schedule Battery ManagementBattery type option: lead-acid batteryEasy diagnostic of the system operating status via LED indicatorCurrent battery usage statusLow voltage cut-off protection: Send alert and cut off power when the battery is lowMPPT (Maximum Power Point Tracking) Charge ControllerReverse current protection to prevent the current circuits from flowing back to the PV panelOver-current and over-temperature protectionReverse polarity protection (for battery and charging electrodes) Industrial Case and InstallationIP30 aluminum caseDIN-rail and wall-mounted designsSupports -10 to 60 degrees C operating temperatureSupports ESD 6KV DC Ethernet protectionRedundant power supply24V~45V DC wide power input SwitchingHardware-based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-XFeatures Store-and-Forward mode with wire-speed filtering and forwarding ratesIEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation8K MAC address table sizeAutomatic address learning and address aging RouterInternet types: Dynamic IP, static IP, PPPoE, L2TP, PPTPStatic and dynamic (RIP1 and 2) routingIP/MAC-based bandwidth controlSupports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications802.1d STP and IGMP Proxy Security Port filtering allows which application can access the Internet.MAC filtering allows you to include or exclude computers and devices based on their MAC addressURL filtering allows you to control access to Internet websites in an URL listIP source guard prevents IP spoofing attacksDoS attack prevention ManagementSwitch Management InterfaceIPv4 Web switch management SNMP v1, v2cStatic and DHCP for IP address assignmentSystem MaintenanceFirmware upload/download via HTTPConfiguration upload/download through HTTPHardware-based reset button for system reboot or reset to factory defaultNetwork Time ProtocolSNMP trap for Link Up and Link Down notificationEvent message logging to remote syslog serverPLANET Smart Discovery Utility