Ultra POE to 4-Port PoE Extender

IP30 Industrial (-40 to 75 C) Physical Port•5-port 10/100/1000BASE-T Gigabit RJ45 interface - 1-port data + power input- 4-port data + power output Power over Ethernet•1-port data + power input - Complies with ultra Power over Ethernet end-span and mid-span PD- Complies with IEEE 802.3at High Power over Ethernet end-span / mid-span PD- Supports PoE input power up to 60 watts•4-port data + power output - Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet / end-span PSE- Up to 4 IEEE 802.3af / 802.3at devices powered- Supports PoE power up to 30.8 watts for each PoE port- Auto detects powered device (PD)•Extends the range of PoE to an additional 100 meters (328ft.) •Forwards both Ethernet data and PoE power to remote device Layer 2 Features•Hardware based 10/100Mbps, half / full duplex and 1000Mbps full duplex mode, flow control, auto-negotiation and auto MDI/MDI-X •Features Store-and-Forward mode with wire-speed filtering and forwarding rates •IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation •Integrates address look-up engine, supporting 8K absolute MAC addresses •9K jumbo frame support in 1000Mbps duplex mode •Automatic address learning and address aging •Supports CSMA/CD protocol Industrial Case / Installation•IP30 metal case •DIN rail and wall-mount design •Supports EFT protection for 6000V DC power, and 6000V DC Ethernet ESD protection •-40 to 75 degrees C operating temperature •No external power cable required for installation •Plug and Play installation •LED indicators for each port in use and PoE power usage (25%, 50% and 75% ) Standards Compliance•IEEE 802.3 10BASE-T •IEEE 802.3u 100BASE-TX •IEEE 802.3ab 1000BASE-T •IEEE 802.3x Flow Control •IEEE 802.3at High Power over Ethernet •IEEE 802.3af Power over Ethernet •FCC Part 15 Class A, CE