JBL Control SB2210 sub med 2 x 10" 500 Watts Power handling JBL Control SB2210 sub med 2 x 10" 500 Watts Power handling

JBL Control SB2210 sub med 2 x 10"

500 Watts Power handling

Varenr:123051
Alt. varenr: CONTROL-SB2210
16 998,-
-+
Bestillingsvare

Du er 5 000 kroner unna å få FRI FRAKT!

BeskrivelseTeknisk infoLenker
Beskrivelse

The internal angled baffle allows for a large port opening and compact front dimensions without compromising driver size. The Control SB2210 produces warm, punchy low-end sound.

Features

  • 2 x 250 mm (10 in.) Woven Fiberglass Cone LF Drivers
  • 500 Watts Power handling
  • Frequency Response Down to 38 Hz
  • 13 x M6 Insert Points Including Inserts for Optional U-Bracket
  • Compact, Low Profile Design
Frequency Range (-10 dB)38 Hz - 500 Hz
Frequency Response (-3 dB)48 Hz - 95 Hz
Power Rating500W (2000W peak) Continuous Pink Noise (2 hrs)1000W Continuous Program(2 hrs)400W (1600W peak) Continuous Pink Noise (100 hrs)
Maximum Input Voltage60.0VRMS (2 hrs), 120V peak
Sensitivity95 dB, 1W @ 1m in half-space (2? loading, average 50 – 90 Hz)
Max SPL122 dB in half-space (2? loading)
Nominal Impedance8?
Minimum Impedance7.2? at 160 Hz
Recommended Filter45 Hz, 24 dB/oct high-pass filter
Low FrequencyTwo 250 mm (10 inch) diameter LF drivers, long-excursion design, woven fiberglass cone, highly damped butyl rubber surround, linear suspension spider , high temperature anodized aluminum voice coil former, high-temp voice coil wire and coil adhesive, FEA optimized motor construction, aluminum conductive ring.
Enclosure MaterialHigh Impact PolyStyrene (HIPS) w/ 10% glass fill and internal 8 mm polyurethane co-mold, painted with highly-UV-resistant paint on white (-WH) model for maximum UV fade resistance.
GrilleThermoset composite coated steel, zinc-plated, 3-layer foam backing.
EnvironmentalIP-45 rating per IEC529 when installed with included MTC-PC2 terminal panel cover. Exceeds MilSpec 810 for humidity, salt spray, temperature & , UV. Passes Mil-STd-202F for salt spray.
TerminalsScrew-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5mm2). Included MTC-PC2 and optional MTC-PC3 protective covers available to provide sealed entrance for additional weather protection.
Agency RatingROHS-compliant. Optional MTC-SBT300 transformer is UL recognized per UL1876.
ColorsBlack or white (-WH)
Dimensions (H x W x D)355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
Net Weight23.31 kg (51.4 lb)
Shipping Weight25.85 kg (57.0 lb)
Included Accessories1 pc MTC-PC2 input panel cover, 4 pcs floor standing feet 4 pcs beveled washers.
Optional AccessoriesMTC-210UB (& ,-WH) U-BracketMTC-SBT300 70V/100V Transformer, 300W multi-tap, installs onto inside of back input panel using included 4 studs.Transformer Taps:70V: 300W, 150W, 75W, 38W100V: 300W, 150W, 75W
Teknisk info

Produktinformasjon

Farge Sort


Lenker